🛄Inserting Sim

How to insert sim card to Pet Buddy

Please Note: Pet Buddy needs to be switched off before inserting the SIM card

Video overview

Got a minute? Check out a video instructions of how to insert a sim card to your Pet Buddy

Insert sim card to Buddy Pendant video

Step by step instructions

Below you’ll find a the steps for inserting SIM card into your Buddy Pendant.

Step 1

Prepare the tools and sim card.

Please Note:

1. Make sure you have obtained the correct 4G NANO sim card.

2. Sim card has to be activated

3. Sim card needs data (at least 75 MB per month)

4. Sim card has SMS receiving and sending capability

5. Sim card has voice calling and receiving ability

Step 2

Make sure that the device is turned OFF before inserting the sim card. Just quick press on the SOS button on the side (less than a second). If the LED lights around the SOS button turn on then the device is still ON.

Instructions from the link below:

⛔pageTurn Off

Step 3

Unscrew the SIM card protector cover with the screwdriver that came with your Buddy tracker.

Pro Tip: Place the screws and cover inside the tracker box so you wouldn’t lose them as they are tiny screws.

Step 4

Remove the cover and the screws. You can use the screwdriver or the tweezers to pry open the SIM card cover.

Step 5

Insert the sim card exactly as shown on the image. It should go in there with ease, DO NOT force the sim card in there.

Folded corner goes in first and the chip has to be facing upwards towards the SOS button as shown.

Step 6

Once you have inserted the SIM card then you’ll notice that it is still sticking out from the device

Not to worry: View the step number 7 and it will explain

Step 7

The sim card will now has to be pushed in with the help from Tweezers or the screwdriver or fingernail if you have longer nails.

Please Note: You will feel or hear a small click once it’s securely in place.

Step 8

Put SIM card protection cover back on the device.

Please Note: As you can see I have broken my cover, I will explain in step 9.

Step 9

Please screw back the tiny screws into the cover.

Please Note: Do not over tighten the screws as the cover may split. Let us know if you accidentally broke or lost the cover.

Step 10

Turn on the watch by holding down the silver button until it vibrates.

How to turn ON your Buddy Pendant?

⚡pageTurn On